Product Catalog

Home/Product Catalog
Pro AV Catalog
Wyrestorm Technologies - RX-700
Request
Quote
All Products
from this brand

4K HDR 4:4:4 60Hz HDBaseT2.0 Receiver with USB Device Inputs, Ethernet & PoH (4K: 100m/328ft)

Model: RX-700

  • HDBaseT Receiver supporting:
  • Content up to 4K/60 4:4:4 & RGB 8-bit
  • The latest HDR standards, including HDR-10, HLG and Dolby Vision at 30Hz
  • HDCP 2.3 encryption technology ensuring compatibility with the latest 4K UHD content and sources
  • HD Multichannel audio up to DTS:X and Dolby Atmos to all outputs
Compare
Project List
Product Info
Utilizing the best in HDBaseT technology, the RX-700 extends 5-Play functionality to your display device over 100m/328ft of Cat 6 cable. Using DSC (display stream compression) the RX-700 can support HDMI video up to 2160p 4:4:4 at 60Hz without any visual loss in quality or latency. With HID’s and data transfer in mind, the RX-700 supports data transmission of USB 2.0 devices like HD webcams, smart whiteboards and flash drives alike.
  • HDBaseT Receiver supporting:
  • Content up to 4K/60 4:4:4 & RGB 8-bit
  • The latest HDR standards, including HDR-10, HLG and Dolby Vision at 30Hz
  • HDCP 2.3 encryption technology ensuring compatibility with the latest 4K UHD content and sources
  • HD Multichannel audio up to DTS:X and Dolby Atmos to all outputs
  • 2160p 4:4:4 or 4:2:2 12-bit HDR content from a source to a display or projector using HDBaseT up to 100m/328ft
  • Automatically activated DSC lossless compression handles HDMI content up to 17.8Gbps
  • HDMI output supports bandwidths of up to 18Gbps
  • Compatible with DVI-I and DP++ v1.3 signals from compatible devices
  • Bidirectional USB 2.0 passthrough offering 190Mbps transfer and HID extension
  • Features 4 USB device ports
  • 10/100 Ethernet port for extension of LAN from TX
  • Bidirectional audio lane separate to HDMI signal sends and receives analog audio signals at either end (requires supporting TX device)
  • Bidirectional IR, RS-232 and CEC communication
  • DIP Switch selection for direction of USB control, long cable mode and firmware update
  • Backwards compatible with HDBaseT 1.0 transmission and receiving devices (lowest denominator takes priority)
  • LED indication for power supply to units, signal status to show established display connection, HDCP presence in signal and transmission link
  • 2-way PoH (Power over HDBaseT) enables the receiver to be remotely powered by the transmitter or power a transmitter
  • Locking DC power jack
  • 12v DC PSU with US, UK, EU & AU Power cables included
  • Mounting brackets included
 
Request Quote
 

Suggested Products

Go to Top